Our Services


TUBE & POLE MANIPULATION SERVICES & CAPACITY

TUBE TAPERING
  • Maximum starting diameter 65mm
  • Maximum wall thickness 2mm
  • Maximum taper length 1200mm
Tube can be formed to a tapered section by rotary swaging method, feeding the start tube, that being the larger diameter into the machine and forming a taper in increments of 330mm. A tapered tube can be produced up to 1200mm long.
Find out more
TUBE END EXPANSION
  • Maximum starting diameter 65mm
  • Maximum wall thickness 2mm
  • Maximum taper length 1200mm
Tube can be expanded by means of end forming, the start size being a maximum of 150mm. Expansion of the tube will result in the wall thickness thinning slightly. Tube end forming includes beading, coning, nozzling, expanding, and sleeving.
Find out more
TUBE END FLARING
  • Maximum finished diameter 152mm
  • Maximum wall thickness 5mm
m
Tube can be flared out to a larger diameter using either a radiused or a straight plunger. This form can then be reduced to form a bead or machined for weld prepping. Tube end flaring can be carried out on most metals.
Find out more
TUBE END 
REDUCTION
  • Maximum starting diameter 150mm
  • Maximum length of reduction unlimited
Tube can be reduced to a smaller diameter using either a radiused or a straight plunger. Tube end reduction can be carried out on most metals.
Find out more
CHANGING TUBE END PROFILE
  • Square to round
  • Round to square
  • Square to hexagonal

Tube can be changed from square to round, round to square or even round to hexagonal in various metals
Find out more
MICRO TUBE END FORMING
  • Maximum starting diameter 3mm
  • Maximum finishing diameter 0.5mm
End forming can be carried out on tube of 3mm and below, reducing the diameter to a minimum of 0.25mm in various metals. Wire can also be worked on depending on its hardness.
Find out more
TUBE CENTRE REDUCTION

  • Maximum starting diameter 0.5mm
  • Maximum finishing diameter 4mm
Many types of metals can be formed in this way, from stainless to silver. In diameters of 0.5mm to 4mm.
Find out more
Metals Processed
  • Mild Steel
  • Aluminium
  • Copper
  • Stainless Steel
  • Carbon Steel
  • Titanium
  • Brass
Additional Facilities
  • Band Sawing
  • Circular Sawing
  • Drilling
  • Grinding
  • Turning
  • Induction Heating (maximum diameter 150mm)
 If you would like to know more about our Tube & Pole Manipulation services please complete our brief enquiry form or call 0121 553 2364 for an informal chat.
Share by: